Product ID:WELD MARK
MSDS Date:09/15/1989
FSC:3439
NIIN:00N068711
MSDS Number: CBJHG

GRYTGOLS BRUKS AKTIEBOLAG

S-610 11
GRYTGOL, SWEEDEN

Emergency Phone: 46-122-43040

Info Phone: 46-122-43040

Cage: JO275

GRYTGOLS BRUKS AKTIEBOLAG

GRYTGOL, SWEEDEN

Telephone: 46-122-43040

Cage: JO275

IRON (III) OXIDE; (IRON)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 97.5%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3 FUME (FE)

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1.4-1.6%

OSHA PEL 5 MG/M3 DUST, C

ACGIH TLV: 5 MG/M3 DUST

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0.80-1%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

COPPER (SARA 313) (CERCLA)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 0.10%

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2 MG/M3 FUME

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

COPPER (SARA 313) (CERCLA)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 0.10%

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2 MG/M3 FUME

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SHORT TERM OVEREXPOSURE TO WELDING
FUMES MAY RESULT IN DIZZINESS, NAUSEA OR DRYNESS OR IRRITATION OF
NOSE, THROAT OR EYES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: CALL MD IMMEDIATELY . EYES: IMMEDIATELY FLUSH
W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
MD . SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . INHAL:
REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS CAN IGNITE
COMBUSTIBLE PRODUCTS.

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:WELD IN WELL VENTILATED AREA. AVOID
INHALATION OF WELDING FUMES.
Other Precautions:FOR ADDITIONAL SAFETY INFORMATION ON WELDING AND
CUTTING, SEE AMERICAN NATIONAL STANDARDS, Z49.1-1973, SAFETY IN
WELDING AND CUTTING AND THE WELDING HANDBOOK, VOL 1, CHAPTER 9,
SAFE PRACTICES IN WELDI NG AND CUTTING.

Respiratory Protection:NOT GENERALLY REQUIRED OR IN OPEN WELL
VENTILATED AREAS. USE NIOSH/MSHA APPROVED WELD FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACES WHERE LOCAL
EXHAUST AND/OR VENTILATION DOES NOT KEEP EXPOSURES BELOW TLV.
Ventilation:LOCAL EXHAUST: DESIRABLE IN SEMI-OPEN AREAS TO HELP KEEP
EXPOS BELOW TLV. MECH (GEN): ESSNTL IN ALL AREAS WHERE (SUPDAT)
Protective Gloves:WELDER'S PROTECTIVE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (SUPDAT)
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
WELDER'S LEATHER PROT APRONS, LEGGINGS, BOOTS, SHOULDER COVERS,
(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VENT: NATURAL VENT IS NOT SUFFICIENT TO KEEP EXPOS BELOW TLV. EYE PROT:
& FULL LENGTH FACESHIELD . WELDERS HELMET W/EYE PROTECTION LENS
SHADE 10 OR DARKER. OTHER PROT EQUIP: HARD HATS, SCREENS, LOW
REFLECTIVITY WALLS OR BOOTHS.

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.